Table of Contents
Advertisement
4.3 Force Recovery Mode
USB 3.l / Jetson platform port of D115WOXB can be used to re-program NVIDIA® Jetson Orin
NX by using the other host system running NVIDIA Jetpack, as the procedure described below.
1.
Power off the system. Ensure the system power must be completely OFF, instead of staying
in the suspend mode or the sleep mode.
2.
Connect a USB cable from Jetson platform USB port to the other host system which will be
used to re-program the new system file into NVIDIA® Jetson Orin NX
3.
Press and hold down Force Recovery Button and then power on the carrier board.
4.
After three seconds, release Force Recovery Button.
5.
NVIDIA® Orin NX will show up on the USB list of the host system as a new NVIDIA target
device.
After the system software is updated successfully, please ensure to power off the system. A clean
power-on will then revert Jetson platform port back to the host mode.
D115W Series User Manual
https://www.avermedia.com/professional/
36
Advertisement
Table of Contents
