Chapter 2. Start your Legion Go to play video games
Controller connection type
The controller can be connected to the tablet using a wired or wireless connection. It can also be connected
to an external device using a wireless connection.
When the controller is attached to the tablet, it connects to the tablet via Pogo pins, which is called a wired
connection. If you detach it from the tablet, it connects to the tablet via Bluetooth, which is called a wireless
connection.
After detaching the controller from the tablet, you can also connect the controller to an external device using
a wireless connection.
Play video games on the tablet of Legion Go
Legion Go is a fully-featured console, which can satisfy different usage requirements. You can use the whole
console to play games on a train, in a coffee shop, or even outdoors. You can also enjoy a lighter gaming
experience after detaching the controllers and placing the tablet on a flat surface.
Gamepad mode
In Gamepad mode, you can play video games by either holding the whole console with both hands, or
holding only the controllers. In this mode, the mode switch on the right controller is in the "OFF" position.
Play video games using a wired connection
After pressing the power button, the tablet and the two controllers turn on at the same time. The two
controllers are connected to the tablet automatically and the solid green light of the controller state light
indicates a successful connection.
You can hold the whole console to play video games almost anywhere.
Figure 6. Play video games using a wired connection
Toggle between X-input mode and D-input mode
When the controllers are connected to the tablet, they are in X-input mode by default. Press and hold Legion
L + RB for one second to toggle between X-input mode and D-input mode.
13
© Copyright Lenovo 2023