Table of Contents
Advertisement
CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING A
PROGRAMME
Thus, washing up shall be done only on the lower basket of your machine. In using this feature,make sure that
there are no dishes in the upper basket.
Note : If you have used an extra feature on the latest washing program, this feature will remain active also on the
next washing program. If you do not want to use this feature on the newly selected washing program, press the
selected feature button again, and check that the lamp on the button goes off.
6.) Door Handle
The door handle is used to open/close the door of your machine.
7.) Programme selector Button
With the program selector button, you can select a suitable program for your dishes.
8.) Start/Pause Button
Once you press the Start/Pause button, the programme you selected with the programme selector button will start
running and the status indicator lamp "wash" will light up. In the stop condition while wash led is On, the Start/
Pause led will blink.
9.) Salt Warning Indicator Light
In order to see whether the softening salt in your machine is sufficient or not, check the salt warning light on the
display. When the salt light warning light starts coming on, you need to fill in the salt chamber.
Rinse aid Warning Indicator Light
In order to check that there is sufficient rinse aid in your machine check the rinse aid warning light on the display.
When the rinse aid warning light starts coming on , fill in the rinse aid chamber.
10. ) Program Monitor Lights
The program flow can be monitored via program monitor lights on control panel.
• Wash
• Rinse
• End
11.) Remaining Time Indicator
The Remaining Time Indicator displays the program times and remaining time during the program that is in operation.
In addition, you can adjust the program delay time by pressing the buttons on the indicator before the program
starts. If you want to change the delay time, you can set the time by pressing the Start/Pause button and using
buttons on the indicator. Press the Start/Pause button again in order to activate.
Child Lock Operation
In order to activate the child lock, press "+" and "–" buttons on the Remaining time indicator simultaneously 3 for
seconds. At this time, "CL" appears for 2 seconds on remaining time indicator. To deactivate child lock, press "+"
and "–" buttons again simultaneously for 3 seconds. "CL" will blink for 1 times.
EN- 22
Advertisement
Table of Contents
