Beko DEN Series User Manual page 33

Hide thumbs Also See for DEN Series:
Table of Contents

Advertisement

Half Load function
(Depends on model)
It is used to operate the machine without
loading it completely.
1. Load your dishes in the machine as
you like.
2. Turn the machine on with On/Off key.
3. Select the desired programme and
press the Half Load key.
While the function is active, the selection
indicator on the selected function key will
become on.
4. Close the door of the machine to start
the programme.
With the Half Load function you can
save both water and power while using
the lower and upper baskets of the
machine.
TrayWash Function
(depends on the model)
Select Intensive 70°C programme and
press function key to run this function.
Tablet detergent function
(depends on model)
Allows to obtain a better drying
performance from the multi-purpose
detergents called as all in one detergents
such as 2in1, 3in1, 4in1, 5in1 and etc.,
depending on the hardness level of the tap
water.
If you have used the Tablet features
during the last washing programme
you used, Tablet function will remain
active in the next washing programme
you will select.
Tablet Detergent function may cause
change in the programme duration.
Fast+ Function
(Depends on model)
It shortens the time of the washing cycle
selected and decreases water consumption
by enabling washing under higher pressure.
AquaIntense Function
in the right side of the lower basket. It will
give better results to place the most soiled
dish to the right front side.
Do not try to remove the AquaIntense
impeller!
Super Rinse Function
(Depends on model)
Depending on the type of the detergent
used, if a detergent dissolving issue is
encountered it will remove the resulting
stains from the dishes and enables the
optimum rinsing performance.
Deep Wash function
(depends on the model)
A A
basket as per the selected program.
Deep Wash Do not attempt to remove
the impeller part!
Selecting this function extends the
program period.
The program may be used as Pot
Washing or Bottle Washing functions
as per your selection.
AquaActive Function
(Depends on model)
This function operates the lower impeller
with a higher pressure and higher speed to
enable a better washing for dishes such as
pans and trays with stubborn, dried soiling.
(depends on model)
AquaIntense impeller
located under the
lower impeller helps
washing your heavily
soiled dishes placed
The Bottle/Pot washing
impeller (A) under the
lower impeller allows
better washing of your
bottles and dishes with
intense dirt that are
placed on the right-
hand side of the lower
33/EN

Advertisement

Table of Contents
loading

Table of Contents