Advertisement
Programming
Saturday:
Repeat steps 4 through 7 for the Saturday OCCUPIED time period
and for the Saturday UNOCCUPIED time period.
Sunday:
Repeat steps 4 through 7 for the Sunday OCCUPIED time period and
for the Sunday UNOCCUPIED time period.
To customize your 7 day Program schedule, repeat
steps 4 through 8 for the Tuesday, Wednesday,
Thursday, Friday, Saturday and Sunday.
A Note About Programmable Fan:
The programmable fan feature will run the fan continuously during
during any time period when it is programmed to be on. This is the best
way to keep the air circulated and to eliminate hot and cold spots in your
building. If using IAQ mode, set fan to IAQ for any time period.
Keypad Lockout Note:
If
appears in the display, then the keypad is locked. All or some of
the keys will not work. Hold the
remove the lock. Use the same procedure to lock the display
and
keys for 3 seconds to
Temporary & Permanent Hold Feature
Temporary Hold: The thermostat will display HOLD and RUN
on the bottom of your screen when you press the
key. If you do nothing, the temperature will remain at this setpoint
temporarily for 4 hours. After this, the program setpoint will then
replace your temporary setpoint.
Permanent Hold: With a temporary hold set, if you press the HOLD
key at the bottom of your screen, you will see HOLD appear below
the setpoint temperature in the display. The thermostat will now
permanently stay at this setpoint and can be adjusted using the
or
keys.
To Return To Program: Press the RUN key at the bottom of your
screen to exit temporary and permanent holds.
Features
or
Advertisement
