How to use
①
⑧
The air filter and the motor safety filter are located on the top of the
vacuum cleaner as above the figure.
• Push the body cover button, open the body cover.
• Hold dust separator handle and pull it upward.
• Open the guide cover by pulling the guide cover lever and remove
the dust.
• Open prefilter cover.
• Pull out the air filter and motor safety filter.
• Clean air filter and motor safety filter with running water.
• Do not wash filters with hot water.
• Eliminate water thoroughly
• Dry it under well-ventilated shade for a day.
• The air filter and the motor safety filter should be cleaned as above
the figure.
Cleaning air filter and motor safety filter
Dust separator
②
⑦
③
Guide cover
Guide cover lever
⑥
WARNING
Dry fully for more than 24 hours in shade.
NOTICE
If filters are damaged, do not use them.
In this cases, contact LG Electronics Service
Agent.
Wash filters at least once a month.
④
Air filter cover
Air filter cover lever
⑤
Air filter
Motor safety filter
15