Advertisement
Available languages
Available languages
EN
Hand Blender Use Instructions
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable mate-
rials, gases or burning flames.
Do not allow children, disabled people or every pe-
ople without experience or technical ability to use
the appliance if they are not properly watched over.
Close supervision is necessary when any appliance
used by or near children.
Warnings for use
Before using the hand blender check the integrity of the appliance and cord
supply.
Be careful when using the hand blender, the blade is very sharp.
Before removing the ingredients from the blade, unplug the appliance from
the socket.
Do not keep the hand blender on for more than 30 seconds, to avoid overhe-
ating, and wait at least for 5 minutes before using it again.
Use the hand blender on a horizontal, dry and stable surface.
Do not immerse the main unit into water or other liquid.
Do not use the hand blender with wet hands and/or bare feet.
Before assembly, disassembly or clean, unplug the appliance from the so-
cket.
Before using the hand blender, allow the ingredients to cool (maximum tem-
perature 60 ° C).
Description Fig. A
1. Speed selector I
2. Turbo speed selector
3. Main unit
4. Removable shaft
Instruction for use
Assembly the hand blender Fig.B
Insert the shaft on the main unit, and screw.
To remove the shaft, unscrew from the motor and separate the two components.
How to use the hand blender
After assembly the hand blender and check it is correctly assembled, connect the power cord to the socket.
To turn on the product, press the button of the desired speed.
The stainless steel blade allows to chop the ingredients into the container.
To get better results, it is necessary to give to the hand blender a rotating movement into the container.
7
Advertisement
