Table of Contents
Advertisement
Quick Links
MODELS:
E-mail: sales@bvahydraulics.com
!
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Maximum Operating Pressure 10,000 PSI
• Leer, comprender, y seguir las instrucciónes antes de utilizar el aparato.
• El manual de instrucciónes y la información de seguridad deben estar comunicado en lengua del operador
antes del uso.
• No seguir estas indicaciónes puede causar daños personales o materiales.
HFS05
HFS10
SFA Companies
10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419
ADVERTENCIA
!
Flange Spreader
Instruction Manual
- 5 Ton Capacity
- 10 Ton Capacity
*
Fax: 816-448-2142
Website: www.bvahydraulics.com
HFS05-M0 _022016
Printed in USA
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BVA Hydraulics HFS05
Summary of Contents for BVA Hydraulics HFS05
- Page 1 HFS05-M0 _022016 Flange Spreader Instruction Manual MODELS: HFS05 - 5 Ton Capacity HFS10 - 10 Ton Capacity SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
-
Page 2: Safety And General Information
(a load dropped suddenly, unexpectedly upon each pressurized attachment be equal to or greater than the it), discontinue use until checked out by a BVA Hydraulics rated working pressure developed by the hydraulic pump. authorized service center. Owners and operators of this rated working pressure developed by the hydraulic pump. -
Page 3: Installation
10,000 psi. refer repairs to qualified, authorized personal. • Do not connect a cylinder to a pump with higher Contact BVA Hydraulics tech service for authorized pressure rating. service center. • Do not subject cylinder to a shock loads, a load... -
Page 4: Before Use
2. If a cylinder or ram has been exposed to rain, snow, 2. Verify that the product and the application are compatible. sand, airborne abrasive, or any corrosive environment, it If in doubt, call BVA Hydraulics Technical Service (888) must be cleaned, lubricated, and protected immediately 332-6419. -
Page 5: Troubleshooting Guide
TROUBLESHOOTING GUIDE The following information is intended as an aid in determining if problem exists. Cylinders should be repaired only by authorized BVA Service Center. For repair service, contact service center in your area. Symptom Possible Causes Corrective Action Erratic action •... -
Page 6: Parts Illustration
- 5 Ton Capacity SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Parts Illustration Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only. -
Page 7: Parts List
Flange Spreader Service Parts MODELS: HFS05 - 5 Ton Capacity SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Parts List Item Part Number Description T10-6-0520-102 Side Plate Fixed Plate T10-6-0550-101... - Page 8 - 10 Ton Capacity SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Parts Illustration Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only.
- Page 9 Flange Spreader Service Parts - 10 Ton Capacity MODELS: HFS10 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Parts List Item Part Number Description T10-6-1020-107 Side Plate Fixed Plate T10-6-1050-106 Adaptor 641-1-0050-105 Hex Set Screw...
-
Page 10: Limited Lifetime Warranty
• Damaged components, including but not limited to bent rams, dented or crushed cylinder walls, broken welds or couplers as well as worn out seals, o-rings and springs are the result of misuse and not covered by warranty and BVA Hydraulics will not provide any warranty credit for such damaged components. - Page 11 Notes SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 E-mail: sales@bvahydraulics.com...
- Page 12 Notes SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 E-mail: sales@bvahydraulics.com...
Need help?
Do you have a question about the HFS05 and is the answer not in the manual?
Questions and answers