Auto Operation (Artificial
Intelligence)
Multi Model
In this operation mode, the system is
automatically operated by the electronic
controls.
1
Turn the appliance on.
2
Press Mode button repeatedly to select the
Auto Operation.
is displayed on the display screen.
•
3
Press
or
temperature.
4
Press Fan Speed button to adjust the fan
speed.
button to set the desired
Auto Changeover Mode
Single Split Model
This mode changes the mode automatically to
maintain the set temperature at ±2 °C
1
Turn the appliance on.
2
Press Mode button repeatedly to select the
Auto Changeover Mode.
•
is displayed on the display screen.
3
Press
or
temperature.
4
Press Fan Speed button to adjust the fan
speed.
Dehumidification Mode
This mode removes excess moisture from a
highly humid environment or during the rainy
season, in order to prevent mildew from setting
in. This mode adjusts the room temperature and
the fan speed automatically to maintain the
optimal level of humidity.
1
Turn the appliance on.
2
Press Mode button repeatedly to select the
Dehumidification Mode.
is displayed on the display screen.
•
NOTE
• In this mode you cannot adjust the room
temperature, it is adjusted automatically.
• The room temperature is not displayed on the
display screen.
• In the dehumidification mode, compressor and
indoor fan may not operate when the room
temperature is below 24 °C
button to set the desired
EN
19