ecobee SmartCamera with voice control - Manual

See what your SmartCamera can do for you

	Balances privacy and clarity by automatically turning off when family members are around and on again when the house is empty.
	Helps you check in with real-time conversations through your mobile device and SmartCamera.
	Provides a full view of home by letting you pan and tilt to view images from the mobile app.
	Keeps you informed with notifications for anything that requires your attention or for the moments that matter.

For details on these features and to discover new ones, go to ecobee.com/smartcamera-features

Open the ecobee mobile app to get started

Once you've opened the app, add your SmartCamera to begin setup.
Find out more at ecobee.com/setup

Meet your SmartCamera

Top view

Pick a view from any angle

You can use the dual stand/mount for both placing or wall-mounting your SmartCamera. Once mounted, you can angle the camera to change the field of view.

How to mount your SmartCamera

1. Attach the mount
   Attach the dual mount/stand to the back of the SmartCamera and plug it in so you can test the view in the next step.
   
2. Test view
   Hold the camera up to the place you'd like to mount it and check the view on the ecobee app. You can adjust the view after mounting.
   
3. Drill hole
   Use a 3/16" drill bit to drill a hole where you will mount the camera.
   
4. Screw in anchor
   Screw the plastic anchor into the wall and ensure it's flush.
   

5. Fasten the screw
   Fasten the mounting screw into the anchor until there's a little amount of space between it and the anchor.
   
6. Hang the mount on the screw
   Remove the mount from the camera and hang it on the screw. If it feels too loose, adjust the screw until it's secure.
   
7. Attach the camera to the mount
   Attach the camera to the mount and make sure it's secure.
   
8. You're all set
   Open the ecobee app to check the camera's view and adjust it anyway you'd like.