Related Manuals for California Air Tools 4710SQ
Summary of Contents for California Air Tools 4710SQ
- Page 1 QUIET FLOW AIR COMPRESSOR OWNER'S MANUAL CALIFORNIA AIR TOOLS 4710SQ 1.0 HP 3.10 CFM @ 40 PSI 2.20 CFM @ 90 PSI 4.7 GALLON STEEL TANK WWW.CALIFORNIAAIRTOOLS.COM Customer Support 1-866-409-4581...
-
Page 2: Table Of Contents
AIR COMPRESSOR COMPONENTS__________________7 PRE-OPERATION CHECKLIST ______________________8 Package Contents & Assembly____________________8 Inspect for Damage _____________________________9 Save Packaging ________________________________9 Thank you for purchasing a California Air Tools, Inc. Compressor Location ___________________________9 Air Compressor. Electrical Power _______________________________10 OPERATING THE AIR COMPRESSOR _______________10 Please contact us if you have any questions. -
Page 3: Important Safety Instructions
AIR COMPRESSOR How to find a local service center: Even quality built equipment might need service or repair parts. Contact the California Air Tools Customer Service Department: Phone: 1-866-409-4581 Online: WWW.CALIFORNIAAIRTOOLS.COM Please provide the information below: Model number and Serial number and specifications shown on the Model number/Serial number plate. - Page 4 AIR COMPRESSOR Customer Support: 1-866-409-4581...
- Page 5 AIR COMPRESSOR Customer Support: 1-866-409-4581...
-
Page 6: Locations Of Important Labels
These labels provide important safety and maintenance information. These labels should be considered as permanent parts of the air compressor. Should any of these labels become illegible, damaged or removed, please contact California Air Tools Customer Service department at 1-866-409-4581 for replacements. - Page 7 AIR COMPRESSOR Customer Support: 1-866-409-4581...
-
Page 8: Air Compressor Components
1. Attach the air filter to the top right side of motor head. (looking from the front to the back of the air compressor ) Model: 4710SQ Screw the air filter into motor head port that is located under the Plastic Head Cover... -
Page 9: Inspect For Damage
AIR COMPRESSOR Inspect for Damage Maintain a Clear Area It is very important that the air compressor is positioned so that Before using the air compressor, make sure the air tank is not there is adequate airflow around the machine. There must be at damaged, inspect all parts for damage, and check that all pipes least 2 feet of obstacle-free space surrounding and above the air are firmly connected. -
Page 10: Electrical Power
AIR COMPRESSOR Electrical Power Electrical Extension Cords Electrical Power Requirements Inspect all electrical extension cords to ensure that they are free of damage. When using an extension cord, use a heavy-duty cord that is no more than 25 feet long and at least 14 gauge.Use only a 3-wire extension cord that has a 3-blade grounding plug. -
Page 11: Test Run
AIR COMPRESSOR Test Run Before using the air compressor for the first time, complete a test run as follows: 1. Turn the power switch to the OFF position. Plug the power supply cord into a power supply socket. Start the air compressor by turning the power switch to the ON position. -
Page 12: Maintenance
AIR COMPRESSOR MAINTENANCE Draining the Air Tank Pressure Switch The frequency at which you should drain the air tank depends on The pressure switch is factory pre-set to shut off at between the environmental conditions and the amount of operating time 115 - 120 PSI and to re-start at between 85 -90 PSI logged. -
Page 13: Troubleshooting
AIR COMPRESSOR TROUBLESHOOTING PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTIONS Let the compressor build pressure in the tank, to the maximum pressure if possible. Brush soapy Pressure drop in the tank. Air leaks at connections. water on air connections and look carefully for air bubbles. -
Page 14: Specifications
AIR COMPRESSOR SPECIFICATIONS Electrical Circuit Air Passage Drawing Customer Support: 1-866-409-4581... - Page 15 This warranty does not transfer to subsequent owners. California Air Tools Inc. will repair or replace, at its option, any parts of the portable air compressor that are proven by an authorized service center to be defective in material or workmanship under normal use during the applicable warranty time period as stated below.
-
Page 16: Warranty
3. Accident, damage, abuse or misuse. 4. Abnormal operating conditions or applications. 5. Repair or modification by customer or any third party without written consent of California Air Tools Inc. 6. Use under operating conditions or in applications not recommended by California Air Tools Inc.