Advertisement
4.3
tyre fitting
4.3.1
Lubricate both tyre beads with an approved rubber lubricant.
4.3.2
Mount and lock the wheel to the stand as shown in fig.12.
4.3.3
Place the lower bead of the tyre over the wheel rim and using the flat-end of the tyre bar place the ball end between the bead and the
rim with the flat side of the tyre bar against the centre post rotate the tool full circle (fig.13).
4.3.4
fit a tube if appropriate and then seat the upper bead in the same manner.
4.3.5
refit valve core, remove wheel from the tyre changer and inflate to seat the beads. Adjust the tyre pressure to manufacturers
specifications.
note: if the tyre has been fitted with an inner tube take care not to trap the tube between the tyre and the wheel rim when bead
seating.
fig.12
5. mAintenAnce
5.1
Every month lubricate the threaded bar with grease.
5.2
Keep the tyre changer clean, use water and a mild detergent.
5.3
check the tyre changer and components for damage or wear and replace parts if damaged.
to obtain a parts list and diagram please log on to www.sealey.co.uk, email sales@sealey.co.uk or phone 01284 757500
6. DeclArAtion oF conFormity
motorcycle & mini tyre cHAnGer
model no: tc965
2006/42/Ec Machinery Directive
93/68/EEc cE Directive
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
imPortAnt: no liability is accepted for incorrect use of this product.
WArrAnty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
inFormAtion: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Parts support is available for this product.
Declaration of conformity
in conformity with the following standards and directives.
the construction file for this product is held by the Manufacturer and may be inspected, by a national
authority, upon request to Jack sealey Ltd.
signed by tim thompson
For Jack Sealey Ltd. Sole distributor in the UK of Sealey Professional Tools.
Sole U.K. Distributor
Sealey Group
Bury st. Edmunds
suffolk.
fig.13
We, the sole distributor in the uK, declare that the product listed here is
24th october 2008
01284 757500
Web
01284 703534
e-mail
tc965
www.sealey.co.uk
sales@sealey.co.uk
Issue no: 1 - 24/10/08
Advertisement
