Table of Contents
Advertisement
Preparation
Perform the same hardness level adjustment that you have set on the control panel also
with the regeneration adjustment switch. For example, if you have adjusted to "3rd level" in
the control panel, also set the regeneration adjustment switch to 3rd level.
Regeneration Adjustment Switch
If the hardness level of the supply water is above 90 °dF or if you are using well water, then
it is recommended to use water purification devices and special filters.
If the hardness level of the supply water is below 13°dF, there is no need to use salt in your
dishwasher. If this is the case, "No Salt Warning Indicator" (if any) illuminates continuously
on the panel of your machine.
If the water hardness level adjustment is set to level 1, the "No salt warning indicator" will
illuminate continuously although it is not necessary to use salt. If you use salt under this
condition, salt will not be consumed and the Salt indicator will not illuminate.
C
If you move your house, it is
necessary to readjust water
hardness level of your machine
by considering the information
given above according to the
hardness level of the supply
water in your new location.
Your machine will display the
most recently adjusted water
hardness level.
Dishwasher / User's Manual
0th Level
1st Level
2nd Level
1
1
3rd Level
4th Level 5th Level
2
3
4
5
15 / 53 EN
Advertisement
Table of Contents
