Advertisement
NOTE : Specifications and others are subject to change without notice for improvement.
1. Application Range
This spec sheet is applied all of the TV used LW45A chassis.
2. Specification
Each part is tested as below without special appointment
1) Temperature : 25 ˚C ± 5 ˚C (77 ˚F ± 9 ˚F),
CST : 40 ˚C ± 5 ˚C
2) Relative Humidity : 65 % ± 10 %
3) Power Voltage : Standard input voltage
(100 V - 240 V ~, 50 / 60 Hz)
· Standard Voltage of each products is marked by models
4) Specification and performance of each parts are followed
each drawing and specification by part number in accord-
ance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
3.Test method
1) Performance : LGE TV test method followed
2) Demanded other specification
- Safety : CE,IEC specification
- EMC : CE,IEC specification
4. General specification
4.1. Operating/Storage environment
1
Operating Environment
2
Storage Environment
4.2. RGB-PC
No.
Item
1
Supported Sync. Type
2
Operating Frequency
3
Resolution
Copyright ©
LG Electronics. Inc. All right reserved.
Only for training and service purposes
SPECIFICATION
Temp : 10 °C ~ 35 °C
Humidity : 20 % ~ 80 %
Temp : -10 °C ~ 60 °C non condensing
Humidity : 5 % ~ 90 % non condensing
Specification
Separate Sync.(RGB)
Horizontal
Analog
Vertical
Max
Recommend 1920×1080 @ 60 Hz
Analog
Max
Recommend 1366×768 @ 60 Hz
- 6 -
Remarks
30 ~ 69 kHz
22MT44A /24MT44A/22MT44N/24MT44N
22MT45A /24MT45A/28MT45A/ 28MT45M
56 ~ 61 Hz
1920×1080 @ 60 Hz
22MT44A /22MT45A/22MT44N
1366×768 @ 60 Hz
24MT44A/24MT44N
24MT45A/28MT45A/ 28MT45M
LGE Internal Use Only
Advertisement
