Table of Contents
Advertisement
Transport Safely
Take care the machine may turn over when loading or
unloading the machine onto or off of a truck or trailer.
Observe the related regulations and rules for safe
transportation.
Select an appropriate truck or trailer for the machine to
be transported.
Be sure to use a signal person.
Always follow the following precautions for loading or
unloading:
1. Select solid and level ground.
2. Always use a ramp or deck strong enough to support the
machine weight.
3. Turn auto-idle switch OFF and turn mode switch to ECO
position.
4. Always select the slow speed mode with the travel mode
switch.
5. Never load or unload the machine onto or off a truck
or trailer using the front attachment functions when
driving up or down the ramp.
6. Never steer the machine while on the ramp. If the
traveling direction must be changed while the ramp,
unload the machine from the ramp, reposition the
machine on the ground, then try loading again.
7. The top end of the ramp where it meets the flatbed is a
sudden bump. Take care when traveling over it.
8. Place blocks in front of and behind the tires. Securely
hold the machine to the truck or trailer deck with wire
ropes.
Be sure to further follow the details described in the
TRANSPORTING section.
SAFETY
SA-24
SA-395
Advertisement
Table of Contents
