Maclean MCTV-963 - Tv Digital Antenna Manual

Overview

1. Telescopic antenna
2. Adjusting up/down sideways
3. 180° rotation
4. UHF signal rim
5. Turning the knob and gain control
6. LED power indication

USAGE

1. Insert the end of the signal cable to the antenna socket "TO TV" and the second end into the jack on the back of the TV signal.
2. Insert the power cord into the DC socket in the antenna, and to a power outlet. 3. At the front of the antenna is located knob for switching and gain control of the antenna:
   VHF receivers: At the beginning of the turn the telescopic antenna with 360° to the correct position, then adjust the length and angle of the antenna for the best reception quality. At the end, adjust the gain.
   UHF receivers: At the beginning of the antenna rim move up and down (about 180°) or sideways (with 180°) to the desired position, then the knob to adjust the gain up to the best possible picture quality.
3. FM receiver signal through the antenna is amplified by an internal gain control: For FM: Insert the signal cable to the "TO TV" and the other end to the signal input jack on the back of the receiver.
4. Required direction of the aerial may differ for each channel.
5. Image can be disturbed when the external antenna is moved.
6. When the effect is mediocre, the antenna may be in a strong magnetic field or other source of interference.

NOTE:

• Before using, please read the operating instructions
• Keep away from children and pets
• Unplug the AC adapter if you plan to leave or stop use an antenna for a long time
• The unit must not be exposed to water
• Main line acts as a switch
• Use the device for its intended purpose
• Avoid direct contact with fire equipment

Frequency Range:
Gain: VHF: 36 dB
Max. output: 100dB
Resistance: 75
VHF: 40-230 MHz
UHF: 470-862 MHz
UHF: 45 dB
Noise: < 5.5dB
AC voltage: DC5V/200mA