Pecron T3000, T6000 - Portable Power Station Manual

Product Introduction

T6000/T3000 is a portable AC/DC power station with built-in lithium battery, which is designed with the safe lithium-ion battery and inverter technology. It's very easy to carry and convenient offering power to electrical appliances with advantages of light weight, large capacity, high power and multiple functions; This item is always used in the field of emergency communication, power lines repair, medical facility, exploration and survey, military, fire rescue and somewhere is lack of power energy.
The followings are its main functions:

• 220V/50Hz or110V/60Hz pure-sine wave AC output
• Battery capacity display
• DC output 12V10A,DC output 48V50A
• High-power LED emergency floodlights for option

Please read carefully the manual before using our product. And please save with the purchase voucher for future reference usage.

Panel Function Description

Packed List

Front Panel

Operation Instructions

Please read the instructions carefully in order to our power supply device correctly or it may cause damage due to incorrect use or inadequate understanding.

1. Support of the floodlights: This power station can offer power supply with AC 220V(Custom 110V can be powered by AC 110v voltage) for two pieces of floodlights (optional)with 60W. The upport can be adjusted according to different heights since it's made of flexible aluminum holders; During using, first plug cable of the floodlight into socket and then turn on the switch, the light will work; And if you want turn off it, just need turn off the AC output or pull up the cable directly.
2. Resetting Key: When overload and short- circuit protection for lithium battery worked, you should first active output by charging the device. Or you can press the resetting key to active it. But the precondition is that there is no load work and short circuit products and overload protection are removed. At this situation, at this situation, just need to long press the key.
3. DC output switch: Press the switch, 12V DC output will work from the cigar socket, at the same time, the blue light indicator for switch and battery capacity indicator are on. And the lights will be off after turning off the switch. This switch simultaneously controls the output of the DC 48V.
4. 12V10A DC output for cigar socket: The fluctuation range of voltage is ±1V; max current is 10A and the overload protection value is 15A.
5. DC charging port: The diameter of DC charging port is aviation plug with 25mm, one pin is '+', two pins are '-'; Please use the original charger to charge for the equipment with voltage of 58.8V and max current 20A. The standard charger is with 9A or 13A current. During charging, the battery volume indicator will flash one by one and will go off when it's fully charged.
6. Battery capacity indicator: showing the remaining battery volume. There will be about 10% discrepancy for the accurate volume since it's based on the voltage. Please charge the device when the first indicator(20%) is flashing. And the light will be turned on when you open the AC/DC switch. And the lighted indicators are depended on the real volume of the battery.
7. 48V50A DC output port: This port is an aviation plug with 32mm; The pin 1 and 3 are '+', pin 2 and 4 are '-'. This port is controlled by the DC switch. The voltage range of DC output is 40V~58.8V. When you connect the load, Please connect well the aviation plug to the required cable first, and then plug into the opposite connector jacks. Please connect the wire when the connector is disconnected. The output port can not be used as a charging port.
8. AC output switch: Press the switch, 110V AC output will start to work and blue switch indicator will light, same as the battery indicator; When you turn off of the switch, both indicator will be off and AC output stops to work.
9. AC output socket: The output wave is pure-sine wave. The power of AC output means the total power of two output plugs. These two plugs are cascade, so the output are same.

Notice About the Function

T3000/T6000 Technical specification