Download Print this page

Living & Co SRO8219 Instruction Manual

Small single electric blanket

Advertisement

Quick Links

SMALL SINGLE ELECTRIC BLANKET
Model: SRO8219
INSTRUCTION MANUAL- IMPORTANT
INSTRUCTIONS RETAIN FOR FUTURE USE-
READ FULLY BEFORE USE

Advertisement

loading

Summary of Contents for Living & Co SRO8219

  • Page 1 SMALL SINGLE ELECTRIC BLANKET Model: SRO8219 INSTRUCTION MANUAL- IMPORTANT INSTRUCTIONS RETAIN FOR FUTURE USE- READ FULLY BEFORE USE...
  • Page 2: Safety Instructions

    SAFETY INSTRUCTIONS Carefully read this manual in full before using this electric blanket. Ensure that you know how the electric blanket functions and how to operate Maintain the electric blanket in accordance with the instructions to ensure that it functions properly. Keep this manual with the electric blanket.
  • Page 3 LOCATION AND SAFE USE OF YOUR ELECTRIC BLANKET Location and Use Use the blanket as an under blanket only. This blanket is designed for domestic use only. Ensure that you have read all the safety instructions carefully before use. Fitting Place the blanket over the bed, with the controllers at the pillow end, ensuring that the blanket heating wires do not overhang the bed edge and is not in the area of any intended pillow.
  • Page 4: Important Safety Information

    LOCATION AND SAFE USE OF YOUR ELECTRIC BLANKET (continued) Caution: First Time Use For first time use it is recommended that the blanket be set on HIGH for 2 hours before sleeping on the bed. This will assist in drying any moisture out of the mattress.
  • Page 5 IMPORTANT SAFETY INFORMATION (continued) Warning. Do not use this electric blanket with an infant or child, or any other person insensitive to heat. Do not use with a helpless or incapacitated person or any person suffering from medical illness such as high blood circulation, diabetes or high skin sensitivity.
  • Page 6 CLEANING Warning! Before cleaning. When not in use or before cleaning, always disconnect the blanket from the mains supply. Detachable Cord. Disconnect the heat control supply cord from the blanket. To remove, lift the locking flap located on the side and pull outwards. Cleaning.
  • Page 7: Technical Specifications

    CLEANING (continued) Damage check. Always check that the blanket is in good working order before use. Check the controller, power supply cord and plug regularly for cuts or damage. Water. Do not dry clean this blanket. Follow cleaning instructions carefully. Do not immerse the controller or supply cord in water.
  • Page 8 RESPONSIBLE DISPOSAL At the end of its working life, do not throw this appliance out with your household rubbish. Electrical and electronic products contain substances that can have a detrimental effect on the environment and human health if disposed of inappropriately. Observe any local regulations regarding the disposal of electrical consumer goods and dispose of it appropriately for recycling.