Table of Contents
Advertisement
3.4 ADD YOUR GARDEN LIGHTS TO THE APP
1. Ensure your smartphone is connected to your 2.4GHz WiFi
network (this is a specific home network, if you are unsure of
the difference, please read the quick explainer below).
2. Power up your NX-GL4 Garden Lights. Within 3 seconds, they
should start flashing red. If they don't, press and hold the
button on the smart controller (figure below) for 5 seconds
until they start flashing.
QUICK EXPLAINER:
• Modern home routers typically provide two WiFi networks
(5GHz and 2.4GHz). These separate networks won't always
be named clearly, especially if you have re-named your
home WiFi network.
• For your NX-GL4 Garden Lights to work, you will need to pair
them to the 2.4GHz WiFi network, which has a greater range
and a stronger and more reliable signal. If you are unsure
which of your WiFi networks is 2.4GHz, please clarify with
your network provider.
Reset/Control
Button
3. The NX-GL4 Garden Lights have the latest pairing technology
to ensure quick and easy setup. To pair the lights to your app,
please ensure that Bluetooth is enabled on your smartphone.
7
Advertisement
Table of Contents
