Table of Contents
Advertisement
OPERATING YOUR TV
Once you have connected your TV to an antenna or cable system, plugged the TV in, and put
batteries in the remote, you are ready to use the TV. The first thing you should do is program
your TV so it memorizes of available analog & digital channels.
Turning Your TV On
To turn your TV on, press the "POWER" button on the remote control. You can also use the
"POWER" button on the front panel. Make sure your TV is plugged in before you try to turn it on.
Programming Your TV' s Channel Memory
Your TV' s memory determines the channels that are available using the "CH
buttons. If a channel is not in memory. you can tune to it with the number buttons, but not with
the "CH " or "CH " buttons. Follow these steps to program your TV' s memory:
1. PRESET
•
Press the "MENU" button twice
to enter "PRESET" menu.
To memorizes all of analog and digital available channels
•
Press the "CH " button to highlight "FULL SCAN" then press "VOL+" button to begin
channel scanning, the channel scanning starting form analog channels to digital channels,
after your TV finishes memorizing the channels, it will return to normal TV viewing.
Note:
Searching for digital channels may take about 50 minute or more to complete.
To memorizes analog channels only
•
Press the "CH " or "CH " to highlight "RECEPTION" then press "VOL+" or "VOL-" button
to select desire "ATV AIR" or "ATV CATV".
•
Press the "CH " button to highlight "MEMORIZE CHANNELS" then press "VOL+" to begin.
•
W hen finishes memorizing the channels it will return to normal TV viewing.
To memorizes digital channel only
•
Press the "CH " or "CH " to highlight "RECEPTION" then press "VOL+" or "VOL-" button
to select desire "DTV AIR" or "DTV CATV".
•
Press the "CH " button to highlight "MEMORIZE CHANNELS" then press "VOL+" to begin.
•
W hen finishes memorizing the channels it will return to normal TV viewing.
Note:
Searching for digital channels may take about 50 minute or more to complete.
PRESET
SKIP
RECEPTION
MEMORIZE CHANNELS
FULL SCAN
SELECT
15
" or "CH "
ON
ATV AIR
ADJUST
EXIT
MENU
Advertisement
Table of Contents
