Table of Contents
Advertisement
Programme progress
The programme status will be indicated
on the display.
When a programme is selected,
Note:
the expected drying time for the
maximum permitted load is displayed.
The moisture sensor measures the
residual moisture in the laundry as it is
being dried. The programme duration
and the remaining time indicated on the
display are automatically adjusted as
the programme progresses, depending
on how damp the laundry is (exception:
Timed programmes).
Changing the programme or
adding more laundry
You can remove or add laundry and
change or adjust the programme at any
time during drying.
Open the door or press Start/
1.
Pause Ü to pause the programme.
Add or remove laundry.
2.
If required, select a different
3.
programme or a different
programme setting.
~ "Overview of programmes"
on page 22
~ "Programme settings"
on page 24
Close the door.
4.
Press Start/Pause Ü.
5.
The programme duration is
Note:
updated on the display, depending on
the load and on the residual moisture in
the laundry. The values displayed may
change when the programme or load is
changed.
Operating the appliance
Cancelling the programme
The programme can be cancelled at
any time by opening the door or
pressing Start/Pause Ü.
Caution!
Risk of fire. Laundry may catch fire.
If you cancel the programme, remove all
items of laundry from the dryer and
spread them out to allow the heat to
dissipate.
Programme end
- ‹ - will appear on the display.
Removing laundry and
switching off the appliance
Remove the laundry.
1.
Press # to switch off the appliance.
2.
en
29
Advertisement
Table of Contents
