Page 1
First of all, you have to prepare a sim card (standard size ) with data flow function activated for your network radio, HD-700 support dual Sim card, if you use two cards better they are from different provider so that switch if weak signal area.
Page 2
◆Please Install USB driver depends on your PC system (such as WIN7 64bit) ◆Connect radio with PC by USB cable ◆power on your radio with hold on press PTT, then radio enter to programming mode ◆fulfill your RealPTT ID (please order from Anysecu) into the software, (for example account:any001; password:123456)
Page 3
Users Manual of WCDMA/GSM Radio Model: HD-700 *APN information if need depends on the SIM card server please call your sim card provider to get it, thanks *RealPTT ID and password and URL please refer to your RealPTT ID supplier or Radio supplier.
Page 4
Users Manual of WCDMA/GSM Radio Model: HD-700 The content of the call and message is kept in the server, and it is deleted regularly. ◆Dispatch Monitor/Call/SMS Users can login PC dispatcher to make call, monitor users, remote kill/stun,active, send message.
Page 5
Users Manual of WCDMA/GSM Radio Model: HD-700 Reference sensitivity E-UTRA 3GPP Standard Test Value 3GPP standard Duplex mode Band 1.4MHz 3MHz 5MHz 10MHz 10MHz 15MHz 20MHz -100 -101 -95.2 -101.7 -98.7 -92.2 -102.2 -99.2 -102 -100 -101 -95.2 -100 -101.5 -95.2...
Page 6
4.Please check antenna installed correctly Network failed 5.Please check SIM Card data is on 6.Please make sure account is valid; 7.Server problem refer to real-ptt provider Please refer to the Anysecu Video guide on Youtube, thanks No idea of how to programming...
Need help?
Do you have a question about the HD-700 and is the answer not in the manual?
Questions and answers