Page 2
This document is intended to give you a quick start on the initial use of Target F501. For further information, please refer to the full user manual that is part of the Target F501 software and can be accessed via the integrated web interface.
Make sure that the Target F501 is switched off before opening the battery compartment. 1. Hold the Target F501 with one hand and with the other hand turn the battery lid counter-clockwise for about 20° degrees. 2. Pull off the battery lid.
Page 4
If NiMH batteries are used in the PM1 Cargo, they must be charged in an external, commercially available charger. If the Target F501 is operated with a PM1 Cargo, it cannot be operated permanently with a USB power supply unit.
Page 5
STARTING THE TARGET F501 After making sure that the Target F501 is loaded with a power module with sufficient capacity, you can start the Target F501 by pressing the power button. While displaying the company logo the Target F501 loads it’s software and does some startup quality checks.
1. Open the USB socket by lifting the plug. 2. Connect the computer to the Target F501 with the supplied USB cable. 3. The Target F501 will immediately show a screen with the URL of the instrument. The URL is always of following scheme: http://(name)-(serial).local/ 4.