6. Align the shift cam fork slots with the shift fork shaft
locating boss and with a washer on each end, install
in the crankcase.
7. Place the shift forks into position on the assembled
countershaft and install into the crankshaft as an
assembly.
8. Align the shift forks to allow engagement with the shift
cam; then engage the shift forks and slide the shift fork
shaft into the locating boss in the crankcase.
FI658
FI652A
9. Install the input driveshaft.
10. Install the spacer (1), shaft (2), reverse idler gear, and
FI662
washer (3).
FI653
FI653A
FI655A
FI646
FI641A
75