Page 4
Pro správnou funkci musí být výrobek trvale pod napětím (nepřipojovat napájecí zdroj za vypínač světelného okruhu)! Pre správnu funkciu musí byť výrobok trvale pod napätím (nepripojovať napájací zdroj za vypínač svetelného okruhu)! It is necessary, for the proper function, to keep the unit under constant voltage (don´t connect the power supply unit behind the switch into the light circuit)! Для...
Page 5
Vzhľa dom k možnosti zanesenia ventilu nečistotami z vody sa doporučuje previesť 1xročne kontról u sítka elektromagnetického ventilu, dotiahnutia skrutkových spojov a dosadacích plôch konektorov. Všetky nerezové diely je možné čistiť iba vodou, mydlom a jemnou handričkou, v žiadnom prípade nie je možné použiť agresivné a abrazivné...
Page 6
Il est recommandé de vérifier le tamis de l'électrovanne une fois par an, afin de vérifier que la menbrane ne soit pas encrassée. La vérification du serrage des vis et des surfaces de contact des connecteurs est également recommandé une fois par an. Tous les composants en acier inoxydable doivent être nettoyés avec de l'eau savonneuse et un chiffon doux.
Need help?
Do you have a question about the INTN 02E and is the answer not in the manual?
Questions and answers