Advertisement
Listening to a CD or MP3 disc
1
Press the CD button.
2
Press the
CLOSE button to open the disc tray 1.
3
Place the disc on the disc tray 1, label side up.
4
Press the OPEN/CLOSE button to close the disc tray 1.
5
You can place discs on the trays 2 - 5 by following steps 2 -
4.
6
Press the
Listening to a cassette tape
1
Open the cassette compartment by pushing the area marked
" ".
2
Load a cassette into the TAPE 1 compart-
ment or TAPE 2 compartment with the
side to be played facing toward you.
3
Press the TAPE (1
want to listen to.
4
Press the
CDMPS660E_QG.pm
Downloaded from:
http://www.usersmanualguide.com/
1 button and within 5 seconds, press the OPEN/
12 cm (5")
/
button to start playback.
2) button to select the cassette you
/
button to start playback.
2
Listening to the radio
1
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
2
Press the TUNING (
station.
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will
8 cm (3")
stop at the first receivable broadcast station.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
● " " will appear when an FM broadcast is in stereo.
If trouble occurs
■
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power on
again.
2. If the unit is not restored in the previous operation, un-
plug and plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory
by resetting it.
Clearing all the memory (reset)
■
1. Press the ON/STAND-BY button to enter the power stand-
by mode.
2. Whilst pressing down the
DEMO button, press the
"CLEAR ALL" appears.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
TAPE 1
TAPE 2
Maintenance
■
Routine maintenance is required for continued optimum perfor-
mance, refer to the operation manual (page 38).
or
) button to tune in to the desired
FM stereo mode indicator
FM stereo receiving indicator
button and the X-BASS/
PRESET
04.3.5, 1:31 PM
button until
TINSEA039AWZZ
Advertisement
