DeWalt DCW210N-XJ Original Instructions Manual page 28

EnGLIsH
CORDLESS RANDOM ORBIT SANDER
DCW210
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Orbits per minute
Wireless Tool Control Transmitter
Frequency Band
Max. Power (EIRP)
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to EN62841-2-4:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
26
EC-Declaration of Conformity
Machinery Directive and Radio Equipment
WALT one of the
e
Directive
DCW210
Cordless Random Orbit Sander
V 18
DC DCW210
1/2
D
Li-Ion
Technical Data are in compliance with:
8000–12000 2006/42/EC, EN62841-1:2015/AC:2015, EN62841-2-4:2014.
These products also comply with Directive 2014/53/EU and
2011/65/EU. For more information, please contact D
MHz 433
the following address or refer to the back of the manual.
mW 0.03
The undersigned is responsible for compilation of the technical
kg 0.93
file and makes this declaration on behalf of D
dB(A) 75.5
dB(A) 86.5
Markus Rompel
dB(A) 1.6
Vice President of Engineering, PTE-Europe
m/s 4.37
2
D
D-65510, Idstein, Germany
m/s 0.31
2
30.06.2021
D
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015/AC:2015, EN62841-2-4:2014.
These products conform to the following UK Regulations:
The Radio Equipment Regulations 2007.
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
WALT declares that these products described under
e
WALT, Richard-Klinger-Straße 11,
e
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
Tool Type
DCW210
WALT declares that these products described under
e
WALT at
e
WALT.
e
WALT at the following
e