Table of Contents
Advertisement
damage will not be covered under
warranty.
•
Do not knock or drop the
monitor during operation and/or
transportation.
•
Excessive usage of the monitor
can cause eye discomfort. It's
recommended to take shorter breaks
more often at your workstation
than longer breaks and less often.
For example, a 5-10 minute break
after 50-60-minute continuous
screen use is likely to be better than
a 15-minute break every two hours.
Prevent eye strain while using the
screen for a constant period by :
• Looking at something varying
distances after a long period of
focusing on the screen.
• Conscious Blinking while you
work.
• Gently closing and rolling your
eyes to relax.
• Reposition your screen to the ap-
propriate height and angle.
• Adjust the brightness and con-
trast to an appropriate level.
• Adjust the environment light-
ing similar to that of your screen
brightness. Avoid fluorescent
lighting and surfaces that don't
reflect too much light.
• Seeing a doctor if your symptoms
worsen.
Maintenance
•
To protect your monitor from
possible damage, do not put
excessive pressure on the OLED
panel. When moving your monitor,
grasp the frame to lift; do not lift
the monitor by placing your hand or
fingers on the OLED panel.
•
Oil-based cleaning solutions may
damage the plastic parts and void
the warranty.
•
Unplug the monitor if you are not
going to use it for an extensive
period.
•
Unplug the monitor if you need to
clean it with a slightly damp cloth.
The screen may be wiped with a
dry cloth when the power is off.
However, never use organic solvents,
such as alcohol or ammonia-based
liquids.
•
To avoid the risk of shock or
permanent damage to the set, do
not expose the monitor to dust, rain,
water, or excessive moisture.
•
If your monitor gets wet, wipe it
with a dry cloth as soon as possible.
•
If a foreign substance or water
gets in your monitor, please
turn the power off immediately
and disconnect the power cord.
Then, if damaged, send it to the
maintenance center.
•
Do not store or use the monitor in
locations exposed to heat, direct
sunlight, or extreme cold.
•
To maintain the best performance of
your monitor and use it for a longer
lifetime, please use the monitor
in a location that falls within the
following temperature and humidity
ranges:
• Temperature: 0-40°C 32-104°F
• Humidity: 20-80% RH
Important information for Burn-in/
Ghost image
•
Please always turn on the Screen
Saver and Pixel Orbiting functions
from the On Screen Display (OSD)
menu.
For additional information, please
refer to Chapter 8 on Screen
Maintenance.
2
Advertisement
Table of Contents
