Philips 48OLED935/12 Service Manual page 18

(48"/55"/65" OLED935 Series stand removal -2)
3.2.2 Rear Cover
Warning: Disconnect the mains power cord before removing the rear cover.
1. Remove all fixation screws [1] ,[2]and [3] that secure the Back cover assy.
2. Unplug the connector that marked by red box below from SSB.
3. Gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear cover from the set.
48"/55"/65'' OLED935 series:
(48"/55"/65" OLED935 rear cover removal-1)