Nikon F3 Instruction Manual page 7

4.
Move the power switch ®
to uncover the red dot
®.
This turns the camera on and makes
it
ready for exposure reading and
shooting.
5
Touch the shutter release
• button
@
lightly.
This activates the exposure meter.
The meter stays on for 16 seconds
after you take your finger off the
button and turns itself off auto-
matically to conserve battery power.
6.
Check battery power.
Look through the viewfinder @ 7
at the liquid crystal display (LCD).
The shutter speed should be dis-
played to show that the batteries
have been properly installed and
their power is adequate. If not, re-
place both batteries.