Table of Contents
Advertisement
10
7. Ethernet
Use a wired connection for seamless playback of high-resolution 352.8kHz, 384kHz, and DSD 256.
8. Trigger Out
Use a link wire between the Evo 150 and a product that has a trigger input. This will synchronise the power state of both products when powering
the Evo 150 on/standby.
9. Trigger In/IR In
Trigger In – Use a link wire between a product that has a trigger output and the Evo 150. This will synchronise the power state of the Evo 150 with
the controlling unit
IR In – Receives modulated IR commands from an IR repeater or custom install systems.
10. RS232C
Custom install control – a full protocol is available for the Evo 150 on our website.
11. Digital Inputs (Coax and Optical)
Note: If a digital input is connected to a TV you can enable TV mode in the input settings of the StreamMagic app. This mode minimises lip-sync
delays on the audio path by bypassing MQA decoding and also reduces the chance of dropouts and glitches from some TVs.
12. Analogue Inputs (AUX/XLR)
13. MM Phono input
For connecting a turntable that uses a moving magnet cartridge.
Ground
If your turntable has a separate grounding lead, then connect here.
14. Sub-Out
15. Pre-Out
Advertisement
Table of Contents
