Page 2
NOTICE • The contents of this instruction manual (the “Manual”) are subject to change without prior notice. • No part of the Manual may be reproduced or distributed, in any form or by any means, without the authorization of Noise Laboratory Co., Ltd. (the “Company”).
1. IMPORTANT SAFETY PRECAUTIONS The following instructions are very important for safe handling of the 01-T1880 (hereinafter “the Unit”). They must be kept strictly to prevent users of the Unit from receiving harm or damage through using the Unit. Read them carefully before use.
2. APPLICATION FORM FOR INSTRUCTION MANUAL We place an order for an instruction manual. Model: 01-T1880 Serial No.: Applicant: Company name: Address: Department: Person in charge: Tel No.: Fax No. Cut off this page “APPLICATION FORM FOR INSTRUCTION MANUAL” from this volume and keep it for future use with care.
3. TABLE OF CONTENTS 1.IMPORTANT SAFETY PRECAUTIONS ........1 2.APPLICATION FORM FOR INSTRUCTION MUNUAL ....... 3 3.TABLE OF CONTENTS ............ 5 4.PREFACE ..............6 5.BASIC PRECAUTIONS FOR OPERATION ........7 6.MAIN UNIT AND ACCESSORIES .......... 9 7.SPECIFICATIONS ............10 8.HOW TO CONNECT EQUIPMENT・OPERATION ......11 9.MEASUREMENT DATA ..........
4. PREFACE We thank you for your purchase of radiation immunity checking patch antenna (01-T1880). This manual contains how to use the 01-T1880 and other important information. In order to obtain the highest performance from your 01-T1880, thoroughly understand the contents of this manual and use as ready reference for operation.
5. BASIC SAFETY PRECAUTIONS 1. Safety Warning Signs and Their Meanings WARNING 警告 ! Indicates Warning. Failure to follow this safety information can lead to a potentially hazardous situation resulting in death or serious injury. CAUTION 注意 ! Indicates Caution. Failure to follow this safety information can lead to a potentially hazardous situation resulting in a minor injury or moderate damage.
Page 10
Do not use or store in environments with extremely hot or cold temperatures. If you cannot maintain a suitable operating environment (temperature: 15°C to 35°C, humidity: 25% to 75%) (Precaution regarding environment) Any required repairs, maintenance, and internal adjustment for this unit must be performed only by service engineers authorized by Noise Laboratory.
6. MAIN UNIT AND ACCESSORIES Mark Item Quantity 1 Patch antenna Detector 1 Coaxial cable SMA-N(L type) 2 m 1 1 Attenuator 3dB(N type connector) 1 Attenuator 20dB(N type connector) 1 Instruction manual...
8. HOW TO CONNECT EQUIPMENT・ ・ ・ ・ OPERATION Connect the patch antenna and detector by coaxial cable in accessory. Insert the attenuator according to measurement electric field strength. Insert 3dB attenuator when electric field strength up to 25 V/m. Insert 20dB attenuator when electric field strength up to 200 V/m. Select ‘THROUGH’...
Page 14
9. MEASUREMENT DATA MEASUREMENT DATA MEASUREMENT DATA MEASUREMENT DATA TEM Cell. Generate the electric field (25 V/m and 200 V/m Set the patch antenna into G Set the patch antenna into G Set the patch antenna into G Set the patch antenna into G-TEM Cell. Generate the electric field TEM Cell.
10. WARRANTY Servicing terms The following terms are applicable to servicing by Noise Laboratory Co., Ltd., (hereafter referred to as the Company) provided to maintain the intended performance of its products. 1. Scope The following terms shall apply only to products made by the Company. 2.
Page 17
WARRANTY Limited warranty Noise Laboratory Co., Ltd. (hereafter referred to as the Company) warrants its products to be free from defects in materials and workmanship under normal use and service for a period of one year from date of delivery. In the event of failure of a product covered by this warranty, the Company will repair the product or may, at its option, replace it in lieu of repair without charge.
11. MAINTENANCE When repair, maintenance or internal adjustment of the unit is required, a qualified service engineer takes charge of such work. Maintenance on the user side is restricted to the outside cleaning and functional check of the unit. When checking or replacing the fuse, turn off the switch of the unit and disconnect the plug socket beforehand.