Summary of Contents for Noise 01-00013B
- Page 1 INSTRUCTION MANUAL AUTOMATIC ELIMINATION PROBE 01-00013B MODEL NOISE LABORATORY CO., LTD. Editoin1.02 AEC00297-00E-0C...
- Page 2 • No part of the Manual may be reproduced or transferred, in any form and for any purpose, without the permission of Noise Laboratory Co., Ltd.(the “Company”) • The contents of the Manual have been thoroughly examined. However, if you find any problems, misprints, or missing information, please contact the dealer where you purchased your product (the “Dealer”).
-
Page 3: Contents In The Package
We thank you very much for your buying AUTOMATIC ELIMINATION PROBE MODEL 01-00013B FOR ESS-Series. This unit is connected to ESS so as to automatically discharge EUT (Equipment under test) that is charged by applying static electricity. It is recommended that this manual be thoroughly understood and used as ready reference for operation. - Page 4 3. HOW TO USE ① Connect AUX connector to the AUX connector of ESS. ② Connect HOT side clip (red) to Cabinet/Earth terminal of EUT. ③ Connect GND side clip (black) to the ground of electrostatic simulator system. (Usually, connect to the grounding plane.) MENU ④...
-
Page 5: Specifications
(HOT side insulated from GND side). Even if the elimination switch is pressed in this status, elimination will not be performed. ※When using a warning light or external trigger output together with the elimination probe, contact NOISE LABORATORY... - Page 6 NOISE LABORATORY CO., LTD. 1-4-4, Chiyoda, Chuo-ku, Sagamihara City, Kanagawa Pref., 252-0237, Japan TEL: +81-(0)42-712-2051 FAX: +81-(0)42-712-2050 URL: http://www.noiseken.co.jp PRINTED IN JAPAN...