Do you have a question about the dePACK and is the answer not in the manual?
Questions and answers
Summary of Contents for DISIBEINT dePACK
Page 1
USER MANUAL dePACK PACK Instructions on the operation Instructions on the operation and configuration of dePACK nfiguration of dePACK DISIBEINT Segle XX, 91 08032 Barcelona 934 560 995 Document: manual_depack_es disibeint@disibeint.com disibeint@disibeint.com Revision: 02 www.disibeint.com www.disibeint.com...
All the operations described in this documentation must be carried out exclusively by qualified personnel authorized by the owner of the installation. During work on and with the device it is always necessary to use the necessary protective equipment. Manual_dePACK_esMANUAL www.disibeint.com Pàgina 3 de 26 DEPACK_EN...
This manual explains the general guidelines that must be considered for the installatio This manual explains the general guidelines that must be considered for the installation, start-up and correct operation of dePACK. Contact us if you need more information. correct operation of dePACK. Contact us if you need more information.
First remove any batteries that may be present, whenever possible to remove them from the equipment, and proceed to dispose of them separately in the proper manner. them separately in the proper manner. Manual_dePACK_esMANUAL www.disibeint.com Pàgina 5 de 26 DEPACK_EN...
2 General description General description dePACK is an industrial IoT controller equipped with a high dePACK is an industrial IoT controller equipped with a high-performance control unit with a fully integrated Yocto Linux system and Node control unit with a fully integrated Yocto Linux system and Node-RED software.
If Sx= False and Ix = True: Blue If Sx= False and Ix = True: Blue If Sx= True and Ix = True: White If Sx= True and Ix = True: White If S4= True: Green If S4= True: Green Manual_dePACK_esMANUAL www.disibeint.com Pàgina 7 de 26 DEPACK_EN...
105 x 88,5 x 48mm Weight 180 g Mounting DIN rail Characteristics and electrical safety Electrical safety CAT III 300 V according to EN 61010 Electric shock protection Double insulation class II Isolation 3 kVCA Manual_dePACK_esMANUAL www.disibeint.com Pàgina 8 de 26 DEPACK_EN...
Page 10
Voltage 2 of 8V2 and 1 of 24V Regulations IEC 60664, VDE 0110, UL 94, EN-61010-1, EN 55011, EN 61000-4-3, EN 61000-4-11, EN 61000-6-4, EN 61000-4-2, EN 61000-6-2, EN 61000-6-1, EN 61000-6-3, EN 61000-4-5 -CE Manual_dePACK_esMANUAL www.disibeint.com Pàgina 9 de 26 DEPACK_EN...
The SIM card reader slot is located The SIM card reader slot is located on the back of dePACK. A SIM card must be inserted into the SIM card on the back of dePACK. A SIM card must be inserted into the SIM card holder.
In this example, an SBL8 230 with RS-485 communication is connected to the dePACK Modbus connector. This connection must be made using a shielded cable to connect the shield to the dePACK GND, the other end of the shield must not be connected.
AO = 4-20 mA output - = Negative 14.3 Potentiometric input Example connection of a TMR magnetic transducer connection of a TMR magnetic transducer with potentiometric output. + = Positive AO = Potentiometric output - = Negative Manual_dePACK_esMANUAL www.disibeint.com Pàgina 13 de 26 DEPACK_EN...
To use Capacitive inputs, the Ix inputs must be configured using To use Capacitive inputs, the Ix inputs must be configured using Node-RED to be of this type. + = Positive - = Negative Manual_dePACK_esMANUAL www.disibeint.com Pàgina 14 de 26 DEPACK_EN...
15.3 Ethernet point to point If a device is connected directly to dePACK via an Ethernet cable, it generates a network in which its IP is 10.1.10.1. To interact with dePACK you must change the IP of your device to 10.1.10.x (i.e. 10.1.10.10).
16 Access Node-RED Node-RED is the tool with which dePACK is programmed. To access Node-RED our device must be on the same network as dePACK. There are two options to access: Write the address in the browser: dePACK-xxxxxx:1880 Being xxxxxx the last 6 characters of the dePACK MAC ...
The control panel is the portal from which the status of the application running in dePACK is viewed and controlled. To access the control panel our device must be on the same network as dePACK. There are two options to access: ...
18 Access to WebAdmin (Configurator) WebAdmin is the portal from which all Wi-Fi and Ethernet settings of the dePACK are viewed and configured. To access WebAdmin our device must be on the same network as dePACK. There are two options to access: ...
19 Wi-Fi configuration The dePACK Wi-Fi settings are found and modified in WebAdmin. It has two Wi-Fi modes: STA mode and AP mode. 19.1 STA mode In this mode, dePACK connects to an external Wi-Fi network. 1. To configure the STA mode, you must access the WebAdmin (review the section “Access to WebAdmin”).
19.2 AP mode dePACK comes from the factory in AP (Access point) mode. When in this mode, dePACK generates its own Wi-Fi network (without an internet connection) to which another device can connect to interact with dePACK. 1. To configure this mode, you must access WebAdmin (see section “Access WebAdmin”) 2.
20 Ethernet The dePACK Ethernet settings are found and modified in WebAdmin. The dePACK IP within the Ethernet network can be configured as dynamic or static. 1. To configure the type of IP, you must access WebAdmin (review the section “Access WebAdmin”) 2.
1. To connect we will open our SSH client (in this case PUTTY) In host name we will introduce the IP of the dePACK, we will choose SSH connection and the “port” 22 and finally we will click on “open”.
Page 24
Write your password on the Write your password on the ´password´ field. Save and exit: CTRL + X. Confirm save with CTRL + X. Confirm save with Y. 3.2. Use this command: ln -sf/etc/ppp/peers/mobile sf/etc/ppp/peers/mobile-auth/etc/ppp/peers/provider Manual_dePACK_esMANUAL www.disibeint.com Pàgina 23 de 26 DEPACK_EN...
Page 25
If you need to connect automatically at every startup, you must enable the service: systemctl enable ppp@provider.service 6. Check the status of the connection and the assigned IP address using this command: ip a | grep ppp0 Manual_dePACK_esMANUAL www.disibeint.com Pàgina 24 de 26 DEPACK_EN...
21.1 Operator APNs table This table shows the APNs, users and passwords of the mobile operators that Disibeint recommends. Mobile operator APN name User Password Movistar 1 movistar.es MOVISTAR MOVISTAR Vodafone airtelwap.es wap@wap wap125 Orange orangeworld orange orange Manual_dePACK_esMANUAL www.disibeint.com Pàgina 25 de 26...
Need help?
Do you have a question about the dePACK and is the answer not in the manual?
Questions and answers