Related Manuals for Mr Beam dreamcut S
Summary of Contents for Mr Beam dreamcut S
- Page 1 MANUAL dreamcut & dreamcut [S] & [X] Translation of the original German manual © 2022 Mr Beam Lasers GmbH | Munich, 23 May 2023 | Revision 2.0...
-
Page 2: Table Of Contents
1.1 Using the manual 1.2 About Mr Beam OVERVIEW OF COMPONENTS 2.1 Scope of supply of Mr Beam with Air Filter System System 2.2 Scope of supply of Mr Beam without Air Filter System 2.3 Overview of Mr Beam 2.4 Connections... -
Page 3: Welcome
The latest version of the manual can be Accessories must be compatible with the found at: We are delighted that you have chosen a Mr Beam! basic unit. www.mr-beam.org/downloads/ Please read this manual thoroughly, even if you are already familiar with some of the functions. -
Page 4: About Mr Beam
The user can connect to a computer via a router or directly via Wi-Fi to Mr Beam. With the exception of the Google Chrome browser, no additional software is required to operate Mr Beam. -
Page 5: Scope Of Supply Of Mr Beam With Air Filter System System
2.1 Scope of supply of Mr Beam with Air Filter System 2.2 Scope of supply of Mr Beam without Air Filter System Laser head and Mr Beam housing 2 keys, focus tool, cable Mr Beam Air Filter Laser head and Mr Beam housing... -
Page 6: Overview Of Mr Beam
2.3 Overview of Mr Beam 2.4 Connections Mr Beam laser cutter: Camera Guide rail Laser head Working area Button Suction nozzle Status Light AIR FILTER SYSTEM Network connection (Ethernet) Mr Beam Air Filter System: Cover Locking screws Exhaust air hose connection... -
Page 7: Safety And Conformity
It is only permitted to operate the Air Filter these. System when it is in perfect condition. Please note that this section is particularly important. Your Mr Beam can only work Repair or maintenance of Mr Beam may In addition, the Air Filter System is also safely if you comply with all aspects for it to do so. -
Page 8: Basic Safety Instructions
Mr Beam to store combustible by laser systems, they are divided materials. into eight safety classes: 1, 1C, 1M, 2, 2M, 3R, 3B and 4. Mr Beam is a class 1 laser. This is ensured by its sealed protective housing and its safety devices. -
Page 9: Qualification Of The User
» Before using the device, ascertain The processing of certain materials whether harmful substances can be can damage Mr Beam and thus lead to produced by the processing of materials operational failures. that can harm Mr Beam itself, the Air Filter System, the environment and/ »... -
Page 10: Warning And Safety Signs
5 GHz RLAN; Harmonised Standard covering the essential requirements of Hereby, Mr Beam Lasers GmbH declares that the radio equipment type “Mr Beam“ is in compliance with Directive 2014/53/EU. Hiermit erklärt die Mr Beam Lasers GmbH, dass der Funkanlagentyp "Mr Beam" der Richtlinie 2014/53/EU entspricht. - Page 11 Hereby, Mr Beam Lasers GmbH declares that the radio equipment type “Mr Beam“ is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.mr-beam.org/conformity Mr Beam Lasers GmbH Laser cutting and engraving machine Gollierstr.
-
Page 12: Unpacking
SETUP In the following chapter, we will guide you from unpacking Mr Beam to setting up the network connection. When setting up your Mr Beam, bear in mind that we have assembled and packed the Unpack the Air Filter System (when equipment with great care. -
Page 13: Connecting The Laser Head
If you have a Mr Beam with Air Filter System [8], connect the exhaust air hose Then plug in the to the air filter system. Then connect... -
Page 14: Suction/Air Filter System
Mr Beam Air Filter System. In both Mr Beam Air Filter System (with air filter) Inserting the key versions, the suction power is regulated according to the presence of exhaust... -
Page 15: Switching Off The Electrical Power Supply
Connection options with Mr Beam To properly turn off your Mr Beam after There are three ways to establish a connection between Mr Beam and your computer or finishing work, please shut it down first. tablet. The choice of the most suitable option depends on your personal usage preference You can shut down your Mr Beam via and the network available at Mr Beam's place of use. -
Page 16: Option A - Wi-Fi Direct Connection
4.8 Option A - Wi-Fi direct connection Status Lights Whether it's during the first setup or if you've connected to your Mr Beam many times before, the Mr Beam status lights show you how to connect to Mr Beam right now by pulsating slowly. Orange pulsating Access your Mr Beam via find.mr-beam. -
Page 17: Option B - Cable And Router
If you have a cable on hand, select Option B connected to the router via cable or to connect Mr Beam to your router with a Wi-Fi. cable. Now use the find.mr-beam service to connect to your Mr Beam for the first time. -
Page 18: Working With Your Mr Beam
If successful, you can now unplug the network cable, use the Wi-Fi connection and use the find.mr-beam.org service. After the introduction to Mr Beam, the first steps of working with your device follow. Time for the first laser job! Page 33 | 04: Setup Page 34... -
Page 19: Beamos
Prepare the laser process in BeamOS. after about 15 seconds. Shutting down position. right corner. Start the job on your Mr Beam by does not switch off your Mr Beam. Design library: Upload designs here and To start the software update, click on pressing the button once. -
Page 20: Camera
There is a camera in the protective cover of For exact positioning, the placement of the The status lights show different operating states of Mr Beam. your Mr Beam which supports you in workpiece must be adjusted by moving the Note: The signals listed here are subject to change with software updates. -
Page 21: Focus
Open the screw on the laser head to move it up and down. Then place the focus tool Regular servicing and maintenance is essential to ensure that your Mr Beam can oper- with the cross between the material and ate continuously without malfunctioning. The following sections contain instructions for the laser head. -
Page 22: Regular Maintenance & Servicing
Mr Beam is not intended to be repaired use, keep the protective cover closed as When cutting and engraving any by the user. To ensure that your Mr Beam much as possible. material, small dirt particles are created can be quickly put into operation again if »... - Page 23 Section 07 ADDITIONAL INFORMATION Page 43 07: Additional information | Page 44...
- Page 24 Lasers GmbH. As described in Section 3 "Safety & conformity" , Mr Beam is not » If your Mr Beam is not used for a while intended to be disassembled by the user. (such as a holiday), we recommend that Disposal, environmental aspects you cover it to protect it from dust and other dirt.
- Page 25 8.1 General Terms and Conditions The latest applicable general terms and conditions, as well as the warranty conditions of Mr Beam Lasers GmbH, can be found at: www.mr-beam.org/policies/terms-of-service 8.2 Contact addresses Address: Mr Beam Lasers GmbH Gollierstr. 70 80339 Munich...
- Page 26 Notes...
- Page 27 Twitter or Facebook, with inspiration from other members of the Mr Beam community. Naturally, we would also be happy if you share your works there and tell your friends about it. We are curious to see how you use your Mr Beam and what you will create with it!
Need help?
Do you have a question about the dreamcut S and is the answer not in the manual?
Questions and answers