Table of Contents
Advertisement
Release Mode
Release mode determines how the camera takes photographs: one at a time, in a
continuous sequence, with a timed shutter-release delay or remote control, or with
reduced camera noise.
1
Place the cursor in the information display.
If shooting information is not displayed in the monitor, press the R button.
Press the P button to place the cursor in the information display.
R button
2
Display release mode options.
Highlight the current release mode in the
information display and press J.
3
Choose a release mode.
Highlight one of the following options and press
J.
Mode
8 Single frame
I Continuous
E Self-timer
" Delayed remote
Quick-response
#
remote
Quiet shutter-
v
release
Information display
Camera takes one photograph each time shutter-release button is
pressed.
Camera records about 4 frames per second while shutter-release
button is held down.
Use for self-portraits or to reduce blurring caused by camera shake
(0 67).
Optional ML-L3 wireless remote control required. Shutter is
released after two-second delay (0 67).
Optional ML-L3 wireless remote control required. Shutter is
released immediately (0 67).
As for 8 (single frame) except that camera makes no sound until
finger is removed from shutter-release button after shooting and
beep does not sound when camera focuses, keeping noise to a
minimum in quiet surroundings.
P button
Description
z
65
Advertisement
Table of Contents
