Download Print this page

Table Of Contents; General - Baxi KH2ZPC Installation Instruction

2-zone floor module

Advertisement

MARKING
This product marked
GB
- Low voltage no. 2006/95/EC.
- Electromagnetic Compatibility no. 2004/108/EC.
CONTENTS

1 - GENERAL

1.1 - GENERAL SUPPLY CONDITIONS
• Generally speaking, the material is transported at the consignee's risk.
• The consignee must immediately provide the carrier with written reserves if any damage caused during transport is found.
1.2 - RECOMMENDATIONS
• Prior to any intervention on the unit, installation, commissioning, operation or maintenance, the personnel performing these
operations must be familiar with all instructions and recommendations provided in this installation manual, as well as the
elements presented in the project's technical data package.
• The personnel in charge of receiving the unit should conduct a visual inspection to detect any damage to the unit caused
during transport.
• The unit must be installed, commissioned, maintained, and serviced by qualified personnel in compliance with the
requirements of all current directives, laws and regulations and according to recognized trade practices.
1.3 - VOLTAGE
• Before all operation, check that the voltage indicated on the appliance rating plate corresponds with that of the mains supply.
1.4 - USE
• This unit is designed for use on water distribution type heating / air-conditioning installations, exclusively within the scope
of systems used in conjunction with the following residential applications:
- 2 zones, floor heating / cooling.
This appliance is not designed to be used by people (including children) whose physical, sensory or mental
capacities are impaired, or who lack experience or knowledge, unless they are supervised or have received
instructions on how to use the appliance by a person who is responsible for their safety. Children must be
IMPORTANT
supervised to ensure that they do not play with the appliance or its accessories.
1.5 - OPERATING CONDITIONS
• This product is designed for use exclusively with a RO.BT type generator.
conforms to the essential requirements of the Directives:
1 - General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2 - Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 - Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4 - Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5 - Start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6 - Maintenance Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
7 - Electrical diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2

Advertisement

loading