6.4.2
Display option code overview
Blind SAM-mode is used to set a display option in the set, while
not having a picture:
1. To access the Blind SAM mode, the user must unplug any
board connected to the back-end board.
2. Cool start the set.
3. Press "062598 + MENU + Panel ID" on the RC command
to set up panel ID.
Table 6-3 Display option code overview
CTN_ALT BOM#
32HFL5662L/F7
37HFL5682L/F7
42HFL5682L/F7
Panel Type
Panel ID
LG LC320WXN-SCA1
105
LG LC370WUN-SCC1
103
LG LC420WUN-SCB1
104
Alignments
TPB1.1HU LA
6.
EN 21
2010-Nov-05