Table of Contents
Advertisement
EN 14
4.
Q549.6E LA
4.3.9
LCD Panel
Refer to
Figure 4-7
and
1. Follow steps described in section
2. Remove the screws that secure the rim [8].
3. Remove both AmbiLight units.
4. Remove both AmbiLight subframes [9].
5. Remove the outer rim (with the touchable controls) by
lifting the bottom part and moving the entire rim upwards.
6. Before sending in the LCD Panel, remove all remaining
subframes!
4.4
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position.
•
Pay special attention not to damage the EMC foams in the
set. Ensure that EMC foams are mounted correctly.
2009-May-29
Mechanical Instructions
Figure 4-8
for details.
4.3.8 IR & LED Board
Advertisement
Table of Contents
