Sony E2306 User Manual page 48

To share your data connection using a USB cable
1
Deactivate all USB cable connections to your device.
2
Using the USB cable that came with your device, connect your device to a
computer.
3
From your Home screen, tap
4 Find and tap Settings > More > Tethering & portable hotspot.
5 Drag the slider beside USB tethering to the right, then tap OK if prompted.
displayed in the status bar once you are connected.
6 To stop sharing your data connection, tap the USB tethering slider or
disconnect the USB cable.
You cannot share your device's data connection and SD card over a USB cable at the same
time.
To share your mobile data connection with another Bluetooth® device
1
Make sure that your device and the other Bluetooth® device are paired with
each other and that mobile data traffic is activated on your device.
2 Your device: From your Home screen, tap
3 Find and tap Settings > More > Tethering & portable hotspot and then tap the
Bluetooth tethering slider to enable the function.
4
Bluetooth® device: Set up the device so that it obtains its network connection
using Bluetooth®. If the device is a computer, refer to the relevant instructions
to complete the setup. If the device runs on the Android™ operating system,
tap the settings icon beside the name of the device that it is paired with under
Settings > Bluetooth > Paired devices, then mark the Internet access checkbox.
5
Your device: Tap Settings next to the paired device. Then, mark the Internet
access checkbox. Wait for
setup is complete.
6 To stop sharing your mobile data connection, tap the Bluetooth tethering slider
again to disable the function.
The Bluetooth tethering function is turned off every time you turn off your device or turn off the
Bluetooth® function.
For more information about pairing and turning on mobile data traffic, see
with another Bluetooth® device on page 125 and To add a virtual private network on
page 51.
To use your device as a portable Wi-Fi hotspot
1
From your Home screen, tap
2 Find and tap Settings > More > Tethering & portable hotspot.
3 Tap Portable hotspot settings > Configure Wi-Fi hotspot.
4
Enter the Network name (SSID) information.
5
To select a security type, tap the Security field. If required, enter a password.
6 Tap Save.
7 and drag the slider beside Portable hotspot to the right.
Tap
8
If prompted, tap OK to confirm.
Wi-Fi hotspot is active.
9
To stop sharing your data connection via Wi-Fi, drag the slider beside Portable
hotspot to the left.
This is an internet version of this publication. © Print only for private use.
.
.
to appear in the status bar. Once it appears, the
.
appears in the status bar once the portable
48
is
To pair your device