Table of Contents
Advertisement
Follow these instructions to install the GPU card:
For Slot7/Slot8
1.
Remove the two screws securing the GPU card bracket and remove the bracket.
2.
Remove the screw securing the GPU card bracket from the side of system.
3.
Loosen the thumbnail screw securing the GPU card bracket.
4.
Slightly lift the GPU card bracket up in the direction indicated as shown in the image below.
5.
Remove the two screws securing the GPU card slot covers and remove the GPU slot covers.
6.
Insert the GPU card into the selected slot. Make sure the GPU card is properly seated.
7.
Install the two screws to secure the GPU card in place.
8.
Use a driver to tighten the thumbnail screw of the GPU card.
NOTE! The screw tightening torque: 5 ± 0.5 kgf-cm.
9.
Reverse step 1-7 to install the GPU card with bracket into the system.
1
2
1
3
System Hardware Installation
- 38 -
1
4
6
5
Advertisement
Table of Contents
