Table of Contents
Advertisement
14
Connecting
AUX OUT Connection
Connect an input of auxiliary device to the AUX
OUT (L/R) connector.
If your device has only one input for audio(mono),
connect it to the left audio jack on the unit.
2
Auxiliary device
X-BOOM PLUS
You can connect two units to play music
1. Connect AUX OUT connector on a unit to the
AUX IN connector on the other unit using
Audio cable.
2. Press
X-BOOM PLUS/DEMO
connected through AUX OUT.
X-BOOM PLUS is displayed.
SCRATCH & CONTROL
3. Rotate
counterclockwise to adjust Delay setting.
X-BOOM PLUS/DEMO
4. Press
setting.
,
Note
y This function
2, BT or PORTABLE Function.
y The initial Delay is 0 ms and the Delay
becomes to 30 ms when you press
PLUS/DEMO. The connected device's Delay
may differ. If Audio Sync is not matched,
adjust Delay of X-BOOM PLUS/DEMO to
synchronize sound.
y It is available to adjust the Delay from 0
ms to 100 ms. Synchronizing tempo is not
available depending on devices.
y Delay value is saved when the unit turns off.
Audio cable
together.
on the unit
clockwise or
to save the Delay
is available on CD, USB 1, USB
X-BOOM
PORT. IN Connection
Connect an output (earphone or line out) of
portable device (MP3 or PMP etc) to the
PORT. IN connector.
Portable cable
Listening to music from your
portable player or external device
The unit can be used to play the music from many
types of portable player or external device.
1. Connect the portable player to the PORT. IN
connector of the unit.
Or
Connect the external device to the AUX IN
connector of the unit.
2. Turn the power on by pressing 1/!.
3. Press FUNCTION to select PORTABLE or AUX
Function.
4. Turn on the portable player or external device
and start it playing.
MP3 player etc.
Advertisement
Table of Contents
