Honda INSIGHT 2022 Owner's Manual page 423

uuHonda Sensing®uCollision Mitigation Braking System
■
CMBS TM On and Off
Left Selector Wheel
Safety Support Switch
422
(CMBS )
TM TM
When you turn the CMBS TM on and off, do the
following.
1. Press the safety support switch.
2. Roll the left selector wheel to the
symbol and push it.
u The message appears on the driver
information interface when the system
turns on or off.
The CMBS TM is turned on every time you start
the power system, even if you turned it off the
last time you drove the vehicle.
1Collision Mitigation Braking System TM
The CMBS TM may automatically shut off, and the
safety support indicator (amber) will come and stay
on under certain conditions:
2 CMBS TM Conditions and Limitations P. 423
When the CMBS TM is activated, it will continue to
operate even if the accelerator pedal is partially
depressed. However, it will be canceled if the
accelerator pedal is deeply depressed.
The vehicle stability assist TM (VSA®) system, vehicle
stability assist TM (VSA®) OFF, adaptive cruise control
(ACC) with low speed follow, safety support and low
tire pressure/TPMS indicators may come on in amber
along with a message in the driver information
interface when you set the power mode to ON after
re-connecting the 12-volt battery.
Drive a short distance at more than 12 mph (20 km/h).
Each indicator should go off. If any do not, have your
vehicle checked by a dealer.
(CMBS TM )