Table of Contents
Advertisement
Storage
Rear side:
Š 4 x 2.5" SATA/SAS4 hot-swappable bays, via CRS2810 from CPU_1
SAS card is required for SAS devices support
SAS
Š Supported
RAID
Š Depends on SAS add-on card
Expansion Slot
PCIe Cable x 6:
Š
Š
1 x OCP 3.0 slot with PCIe Gen5 x16 bandwidth, from CPU_0
Supports NCSI function
1 x OCP 3.0 slot with PCIe Gen5 x16 bandwidth, from CPU_1
Supports NCSI function
1 x M.2 slot:
Š
Š
Š
1 x M.2 slot:
Š
Š
Š
Š
1 x M.2 slot:
Š
Š
Š
Internal I/O
Š 2 x M.2 slots
Š 1 x TPM header
Š 2 x OCP 3.0 slots
Front I/O
Š 2 x USB 3.2 Gen1
Š 1 x Power button with LED
Š 1 x ID button with LED
Š 1 x NMI button
Š 1 x Reset button
Š 2 x LAN activity LEDs
Š 1 x HDD activity LED
Š 1 x System status LED
3 x PCIe x16 (Gen5 x16) FHHL slots, from CPU_0
3 x PCIe x16 (Gen5 x16) FHHL slots, from CPU_1
M-key
PCIe Gen3 x4, from CPU_0
Supports 2280/22110 cards
M-key
PCIe Gen3 x4, from CPU_1
Supports 2280/22110 cards
Occupied by CRS2810 - 4 x SATA ports
M-key
PCIe Gen3 x2, from CPU_1
Supports 2280/22110 cards
Hardware Installation
- 13 -
Advertisement
Table of Contents
