Honda ACCORD Hybrid 2022 Owner's Manual page 607

■
What to Do After the Engine Starts
Once your vehicle's engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle's 12-volt battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
uuIf the 12-Volt Battery Is DeaduJump Starting Procedure
1Jump Starting Procedure
The Vehicle Stability Assist
Stability Assist TM (VSA®) OFF, Adaptive Cruise Control
(ACC) with Low Speed Follow, safety support, and
low tire pressure/TPMS indicators may come on in
amber along with a message in the driver information
interface when you set the power mode to ON after
re-connecting a 12-volt battery.
Drive a short distance at more than 12 mph (20 km/h).
Each indicator should go off. If any do not, have your
vehicle checked by a dealer.
TM (VSA®) system, Vehicle
605