Page 2
® speaker. If you have any questions regarding ® installation that are not answered in the following directions, please contact your local sound contractor or the Soundsphere ® MSE Audio technical support team. Contact information can be found on the back of the manual.
Page 3
1. Remove the reflector from the Q-12A by removing the 3 bolts and tabs. 2. Remove the 8 screws securing the driver. Remove the driver by pushing up on it through the port hole in the sphere with Install the new driver and secure with screws.
Page 4
Soundsphere ® by MSE Audio ® | 6400 Youngerman Circle | Jacksonville, FL 32244 913-663-5600 or 855-663-5600 | www.soundsphere.com...
Need help?
Do you have a question about the Q-12A and is the answer not in the manual?
Questions and answers