Advertisement
Box Contents
Gen 2 Hub
Quick Start Guide
1) Open the B-hyve App
Log into your B-hyve account and go to devices
under se ings to add the Gen 2 Hub as a new device.
The app will walk you through the rest of the process.
For new users, search for
"B-hyve" and download the free
Android or iOS app. Create an
account to begin timer setup.
2) Power Your Gen 2 Hub
Write down the MAC address:
12 digit alphanumeric code on
the back of the hub.
Hub MAC Address:
—— : —— : —— : —— : —— : ——
Plug the Gen 2 Hub into an indoor outlet
within range of your B-hyve device and
Wi-Fi signal.
Avoid areas where the signal
must travel through dirt or thick
steel barriers.
3) Enter Pairing Mode
Press the B-hyve bu on to enter into
pairing mode. Your hub will flash a
blue light every 5 seconds.
Hub
Model: BH1G2
Range: 300 (91 m) without interference
Temperature Operating Range: 32°F-104°F (0-40°C)
Storage Temperature: -4°F to 140°F (-20 °C to 60 °C)
Humidity Operating Range: 0–90%
Input: 100-240V ~ 50/60Hz 0.2A
Output: 5V-1.0A
For Indoor Use Only
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Orbit b-hyve BH1G2
- Page 1 Box Contents Gen 2 Hub Quick Start Guide 1) Open the B-hyve App Log into your B-hyve account and go to devices under se ings to add the Gen 2 Hub as a new device. The app will walk you through the rest of the process. For new users, search for “B-hyve”...
- Page 2 FCC Statement: FCC ID: ML6-BH1G2 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the b-hyve BH1G2 and is the answer not in the manual?
Questions and answers