RTS PAM-101 User Instructions

SCROLL/GAIN
DISPLAYS
™
SPEAKER
LISTEN KEY
SCROLL/GAIN
CONTROLS
FRAME
TELEX COMMUNICATIONS, INC.
MADE IN U.S.A.
SERIAL
NO.

General Description

The PAM-101 Production Audio Monitor combines two
listen-only keypanels in a single, rack-mountable unit. It is
ideal for two persons operating side-by-side in a studio or
mobile production environment. Each person can monitor
8 intercom ports and 1 auxiliary audio source. Separate
volume controls for each audio source provide complete
control over the audio mix. Each keypanel can be used as a
stand-alone monitor, using either headphones or the inter-
nal speaker. Or, the output can be transferred to the line in-
put of an adjacent keypanel or similar device.
9350-7614-001 Rev A 10/98

USER INSTRUCTIONS

PAM-101 PRODUCTION AUDIO MONITOR
KEYPANEL A CONTROLS
LISTEN ON/OFF KEYS
MASTER AUX
MASTER AU
HEADPHONE
MASTER AUXILIARY HEADPHONE
VOLUME INPUT JACK
CONTROL VOLUME
CONTROL
AUX INPUT OUTPUT B
PUSH
EXP
ADDRESS ASSIGN
KEYPANEL B CONNECTIONS
ADDRESS ASSIGN
AND MENU SELECT
SWITCH (RECESSED)
KEYPANEL B CONTROLS
AUX
MASTER
SPKR XFR SPKR XFR HEADPHONE
TRANSFER SWITCH
(MIX A OUTPUT ON/OFF)
OUTPUT A AUXILIARY
(MIX A OUTPUT) INPUT
OUTPUT A AUX INPUT
PUSH
ADDRESS ASSIGN
KEYPANEL A CONNECTIONS
Connections
Connections are identical for each keypanel.
1. Intercom connection: Use a standard RJ11 or DB9 in-
tercom cable (Figures
FRAME connector to an available intercom port.
Note: the expansion connector (EXP) is not used.
2. Optional auxiliary input connection: Connect an auxil-
iary audio input to the AUX INPUT connector on the
back panel.
AUX INPUT Specifications
Input level: 0 to +8 dB
Connector: 3-pin XLR Female
Pin 1: Shield
Pin 2: Audio+
Pin 3: Audio –
™
MASTER
DUAL INTERCOM
CONNECTORS
FUSED POWER
FRAME EXP
INPUT AND
POWER SWITCH
1 and 2). Connect from the