Introduction; Description; Features - Audiocom MS-4002 User Manual

Master station
Hide thumbs Also See for MS-4002:
Table of Contents

Advertisement

Description

The MS-4002 is a complete 4-channel master station and system power supply (24 VDC, up to 3.5 Amps total power) in a
single unit. Simply plug it into any AC power outlet from 100 to 240 volts, add a microphone or headset, connect intercom
stations to the backpanel, and it's ready to communicate. It has 1-, 2-, 3- and 4-channel connectors, so a separate breakout is not
needed to mix multiple intercom stations. The MS-4002 fits in a standard 19-inch equipment rack and is 1 rack unit high. The
basic MS-4002 can communicate with four intercom channels. This number can be increased by connecting an optional
EMS-4001 Expansion Station. Each EMS-4001 adds four channels, and up to four of these expansion stations can be connected
for a total of 20 channels.

Features

Auto-Sensing Headset Connector
The MS-4002 has a built-in auto-sensing headset connector
that dynamically determines whether the headset connected
to the system is dynamic or electret.
Speaker Station or Headset Station
Use the built-in speaker for listening and add an optional
Telex MCP-90 series gooseneck panel microphone for
talk-back. Turn OFF the speaker volume and plug in any
Telex headset for private communication.
Public Address (PA) Output, with PA Key
Use the intercom microphone to talk over a PA system.
Back-lit Keys
Back-lit keys improve visibility in low-light environments.
Incoming Call Indications
Red flashing call lights with an optional beep tone, if desired.
Mic Kill Key
Turn off all microphones for a specific channel to quickly
clear traffic on the channel.
Program Input for each Channel
Connect any line-level audio source for monitoring speaker
or headset, or for routing to an intercom channel. The
program audio to the channel can be set to interrupt while the
MS-4002 operator is talking on the channel.
Listening with Externally Powered Speakers
Connect externally powered speakers and monitor channels
1, 2, 3, and 4.
Expandable
Add more channels by connecting optional EMS-4001
Expansion Stations. Each EMS-4001 adds four additional
powered channels (up to twenty channels).
Clear - Com™* Compatible
Can run in unbalanced mode.
* Brand names mentioned are the property of their respective
companies.
CHAPTER 1

Introduction

1

Advertisement

Table of Contents
loading

Table of Contents