Table of Contents
Advertisement
The slots are "hot swappable" and are capable of insertion / removal whilst the unit is powered.
REDUNDANCY WIRING (Option 6)
Where the DLA200 is purchased as a redundant system with two identical MLA modules the rear panel
cabling configuration is shown below.
The customer is required to supply the system input and output cables. Peak Communications will
supply the module interconnecting cables unless instructed otherwise.
REDUNDANCY WIRING WITH OFFLINE UNIT MONITORING (Option 6T)
An alternative to the above, the DLA200 can be purchased as a redundant system where the redundancy
switching is performed using transfer switches to allow the offline unit to be operated. In this
configuration the cabling is shown below.
Again, Peak Communications will supply the module interconnecting cables unless instructed
otherwise.
Issue 1.15
DLA200 Dual Line Amplifier Unit
Page 7
Advertisement
Table of Contents
